Beer is mostly water, and the water defines the beer. Mineral content, chlorine, and microbes all change flavor and consistency. Beyond the water that goes into the beer, breweries fight bacteria and pathogens in the brew lines, the kegs, and the packaging line. A contaminated line or keg means off flavors, spoilage, and lost product. Sanitation has to be thorough and repeatable, and it has to leave nothing behind that changes the beer.
ITS engineers a combination for each brewery, chosen for the water and the objective. Reverse osmosis and filtration give the brewer control over mineral content, so the water is the same every batch and the hop character comes through as intended. Electrochemical chlorine dioxide, generated on demand from sodium chlorite and electricity, sanitizes brew lines, kegs, and packaging equipment at low dose, penetrating biofilm and reducing bacteria and pathogens without leaving flavor behind. UV, of the type chosen for that water, adds disinfection with no chemical addition. Nano and micro bubbles deliver oxygen or the chosen gas efficiently where the process needs it. Clean-in-Place systems circulate cleaning and sanitizing solutions through equipment in a set sequence, so sanitation is proven, not assumed, and uses less water and chemistry. Monitoring verifies the result. ITS serves breweries with advanced custom technology chosen for the water and the outcome.
Nano and microbubble technology works across water treatment, mashing, fermentation, and carbonation in brewing. In water preparation, supersaturated oxygen supports yeast vitality and fermentation performance, and paired with oxidizers such as ozone or chlorine dioxide, the bubbles create reactive oxygen species that destroy microbial biofilms, reducing chemical use while maintaining sanitation. Microbubbles generate shear forces that physically disrupt biofilms and residues inside tanks, lines, and filters, which suits clean-in-place systems. In mashing, fine oxygenation can enhance enzymatic activity for better starch conversion and sugar yield, while inert gas bubbles such as nitrogen or carbon dioxide displace oxygen to protect delicate malt flavors at oxidation-sensitive steps. In boiling, nano and microbubbles improve mass transfer and solubilization of hop oils, resins, and alpha acids, stabilize volatile hop oils through nano-emulsion formation, and lock in aroma compounds that might otherwise volatilize. In fermentation, nano-oxygen systems provide stable, long-lasting oxygen availability, supporting sterol and fatty acid synthesis essential for yeast health, with faster, more complete fermentations, cleaner flavor profiles, and improved alcohol yield. Because nanobubbles are smaller and more uniform than traditional sparging, they minimize shear stress on yeast and reduce off-flavors caused by oxidation. In conditioning and carbonation, nanobubble carbonation produces finer, creamier mouthfeel and improved foam stability, with bubbles remaining in suspension longer for better carbon dioxide retention and flavor stability, while nitrogen or carbon dioxide nanobubbles reduce dissolved oxygen levels, extending shelf life. In cleaning, ozone or chlorine dioxide nanobubbles penetrate and oxidize organic residues and microbial biofilms in CIP systems, reducing the need for caustic chemicals and rinse water.
ITS designs and engineers electrochemical chlorine dioxide systems manufactured by North American Dioxide. Rather than shipping in stored precursor chemicals or pre-mixed two-part solutions, the systems generate chlorine dioxide electrochemically on site, on demand, producing only what the process calls for, when it calls for it. There is no bulk hazardous chemical storage on premises, no shelf-life degradation from stored precursors, and dosing that scales in real time with production. One platform is applied across process water, product quality, and sanitation. Brewing liquor and process water are disinfected without the taste and odor issues associated with chlorine, protecting the clean flavor profile brewers depend on. Hop utilization and flavor extraction are supported by the nanobubble delivery platform, which disperses gas at nanometer scale throughout the liquid, increasing dissolved oxygen uniformity and surface contact with hop and malt material for more complete extraction of hop oils and flavor compounds and a healthier, more consistent fermentation environment for yeast. The generated chlorine dioxide solution serves as a secondary sanitizer for tank interiors, fittings, valves, and hard-to-reach surfaces, a fast-acting, broad-spectrum sanitizer without the corrosive drawbacks of chlorine-based alternatives. The same solution is used for spray-down sanitation of floors, drains, and production areas, and paired with a compatible surfactant for full Clean-in-Place cycles, breaking down soil and biofilm while sanitizing in the same pass across tanks, lines, and fittings. Because the system generates its own sanitizing chemistry on site, the same platform can typically replace several separate purchased products: process water treatment, secondary tank sanitation, area spray-down, and CIP support, with one engineered, certified system.
No one size fits all. Each brewery is different. ITS engineers the right combination of technologies for that water and that objective. Understand the water. Define the objective. Engineer the process. Measure the result.