PFAS, the forever chemicals, do not break down naturally and are now regulated at very low levels in drinking water and discharge.
ITS approaches PFAS with the right combination of proven removal technologies for the specific water, including adsorption, membrane separation, and advanced oxidation, verified by testing.
PFAS is a problem that cannot be ignored or solved with one standard filter. The treatment has to match the water chemistry and the regulatory target.
PFAS, per- and polyfluoroalkyl substances, are a large family of man-made chemicals built around carbon-fluorine bonds. That bond is one of the strongest in chemistry, which is why PFAS do not break down naturally, why they build up in water, soil, and the body, and why they are called forever chemicals. There are thousands of PFAS compounds, from long-chain compounds such as PFOA and PFOS to short-chain compounds such as PFBA and PFHxA, and the short-chain compounds are generally harder to remove than the long-chain ones. The U.S. EPA set enforceable drinking water limits of 4.0 parts per trillion for PFOA and PFOS in its 2024 National Primary Drinking Water Regulation. PFAS treatment falls into two groups: separation and destruction. Separation removes PFAS from the water without destroying it: granular activated carbon adsorption, where PFAS molecules stick to a porous carbon surface; ion exchange resins, including PFAS-selective resins, which generally offer higher PFAS capacity per volume of media than GAC and better performance on short-chain compounds; and membrane separation, nanofiltration and reverse osmosis, where pressure-driven membranes reject PFAS by size exclusion and charge repulsion, with RO rejecting the broadest range including very short-chain compounds. Destruction breaks the carbon-fluorine bond: advanced oxidation, where oxidants such as ozone or hydrogen peroxide paired with UV light generate hydroxyl radicals; electrochemical oxidation, where boron-doped diamond electrodes generate reactive species that attack carbon-fluorine bonds; plasma treatment, best reserved for treating concentrates; and supercritical water oxidation and high-temperature incineration, used for concentrated waste streams, spent media, soils, and biosolids rather than drinking water directly. No single method removes all PFAS equally. In practice, effective PFAS treatment pairs capture with a destruction or secure disposal step for what is captured, and the right combination depends on which PFAS compounds are present, the water chemistry, and the regulatory target.
PFAS treatment applies to drinking water supplies, groundwater, industrial wastewater, and discharge streams that must meet tightening limits. It is used by municipalities, manufacturers, and any operation whose water carries PFAS from firefighting foam, industrial discharge, landfill leachate, or contaminated source water.
ITS approaches PFAS the same way it approaches every water problem: with the full range of technologies available, and the right combination engineered for the application. For PFAS, ITS uses a special filtration process combined with UV, with the UV type chosen depending on the water. The filtration step separates PFAS from the water; the UV step is selected and combined with the other tools for that water and that objective. The combination is designed around the water, verified by testing, and adjusted until it meets the target.