Food, beverage, and pharmaceutical plants must clean equipment between runs without taking it apart, and cleaning has to be proven, not assumed.
Clean-in-Place systems circulate cleaning and sanitizing solutions through equipment in a six step sequence: rinse, wash, rinse, sanitize, rinse, and verify. ITS designs CIP systems around the equipment, the soil, and the required result.
A CIP system that is engineered for the plant cleans thoroughly, uses less water and chemistry, and leaves a record that the job was done right.
Clean-in-Place is an automated method for cleaning the interior surfaces of pipes, valves, tanks, and process lines without dismantling them. It follows a six-step sequence: pre-rinse to flush product residue with water; alkaline wash, circulating a hot caustic solution to remove proteins, fats, and sugars; intermediate rinse to remove residual detergent; acid rinse, optional, to dissolve mineral scale; final rinse with high-purity water, filtered, reverse osmosis, or deionized; and sanitization using hot water, chlorine dioxide, peracetic acid, or ozone. Newer enhancements are electrochemical chlorine dioxide generation for on-demand sanitization, nano and micro bubble integration to improve cleaning action and oxygen diffusion inside pipes, and smart monitoring with SCADA and PLC integration for real-time data, cycle logs, and alarms. Ozone can supplement or replace CIP methods and retrofits to existing systems.
Food and beverage processing, brewing, pharmaceutical manufacturing, dairy operations where mineral scale must be dissolved, and any industrial processing plant where product safety and cleanliness are non-negotiable.