Some water problems need a stronger oxidant than chlorine dioxide alone, for example breaking down stubborn organics or controlling biofilm.
ITS ozone systems generate ozone on demand and deliver it through nano and micro bubbles for efficient transfer. ITS also builds a nano and micro bubble ozone generator with a sealed bolt top and ozone destruct on the back, so unused ozone is destroyed safely.
Ozone is a powerful oxidant that leaves no chemical residual behind, because it breaks down to oxygen. The key is delivering it efficiently and destroying any excess.
Ozone is generated on site as needed, because it decomposes rapidly back to oxygen and cannot be stored or shipped. It is produced by ultraviolet light for small demand and by corona discharge for larger demand, where high-potential current passes through oxygen or ambient air between electrodes. Ozone disinfects faster than conventional chemicals and can supplement or replace CIP and COP methods such as chlorine, steam, caustic, hydrogen peroxide, or quaternary ammonia compounds. It retrofits easily to existing chemical CIP systems, cuts rinse-up time and the time needed to switch flavors or products, and reduces chemical costs, discharge assessments, and downtime. It can also be injected through nano and micro bubbles for efficient dissolved delivery. Ozone has been used for water treatment since the early 1900s, with the first known use in Nice, France in 1903.
Clean-in-place and clean-out-of-place work in food processing, including pure water storage tanks, milk and juice tanks, system piping, equipment rinse, floor and drain rinse, foot spray, chillers, mixers, and filling equipment. It also serves drinking water disinfection, wastewater treatment, air purification, biological control for cooling towers, swimming pools and hot tubs, color removal, phosphate removal, BOD and COD reduction, odor abatement, and food rinses.